Explore practical construction guides covering concrete quantities, roofing measurements, reinforcement, building materials and site calculations. Find clear explanations and worked examples to help plan your measurements and estimates.
Featured Construction Guides
Start with these practical references for common site measurements.
How to Calculate Concrete Volume
Understand the measurements and formulas used to estimate concrete for common shapes.
Read the concrete guideHow to Calculate Roof Area
Learn how roof pitch and slope affect the actual surface area used for material estimates.
Read the roofing guideConstruction Measurements Guide
Review common dimensions, area, volume and unit conversions used in construction work.
Read the measurement guideLatest Construction Guides
Browse published articles from the BuildersMeasures Blogger feed.
Try another search term or choose a different category.
Loading published articles...
Construction Guide FAQs
Answers to common questions about using these guides.
What can I learn from these construction guides?
The articles explain practical measurements and estimating methods for concrete, roofing, reinforcement, masonry and other common construction tasks. Each article covers its specific topic and may include formulas or worked examples.
Can I use the guides with construction calculators?
Yes. Use the guides to understand the measurements and assumptions, then use the relevant BuildersMeasures calculator to work through your quantities. Check that the calculator units match your measurements.
How do I estimate concrete volume?
For a rectangular section, multiply length by width by thickness or depth using consistent units. Convert the result to the required volume unit and calculate separate sections individually when their dimensions differ.
Why should I allow for material waste?
Actual quantities can differ because of cutting, breakage, irregular surfaces, spillage and site conditions. Apply a suitable allowance for the material and project rather than assuming one waste percentage fits every job.
Are the calculations a substitute for structural design?
No. Quantity estimates do not replace structural design, building regulations, engineering drawings or professional inspection. Confirm safety-critical dimensions and reinforcement requirements with the responsible qualified professional.
Why are some new articles missing from the list?
The list uses published Blogger posts. A post may not appear if it has not been published, is outside the feed results available to the page, or the feed request fails. Use the Load More button to request the next batch.
Need a construction calculator?
Use practical calculators to estimate common building quantities and check your measurements.
Browse All CalculatorsWant to understand the formulas?
Read about measurement methods, assumptions, rounding and the limitations of calculator results.
Read How We Calculate